| X-ray Generator |
Type |
Super high frequency generator with automatic exposure control |
| Safety protect |
With overload protection |
| Frequency (output) |
460kHz |
| Normal electric power |
50kW |
| Exposure voltage kV |
40-150kV |
| Exposure voltage precision |
±10% |
| Exposure time |
1ms~8S |
| Current |
10mA~640mA |
| Current steps |
10mA, 12.5mA, 16mA, 20mA, 25mA, 32mA, 40mA, 50mA, 64mA, 80mA, 100mA, 125mA, 160mA, 200mA, 250mA, 320mA, 400mA, 500mA, 640mA |
| Current time product |
0.1mAs ~ 640mAs |
| Current time product steps |
0.1mAs; 0.125mAs; 0.16mAs; 0.2mAs; 0.25mAs; 0.32mAs; 0.4mAs; 0.5mAs; 0.64mAs; 0.8mAs; 1.0mAs; 1.25mAs; 1.6mAs; 2.0mAs; 2.5mAs; 3.2mAs; 4.0mAs; 5.0mAs; 6.4mAs; 8.0mAs; 10mAs; 12.5mAs; 16mAs; 20mAs; 25mAs; 32mAs; 40mAs; 50mAs; 64mAs; 80mAs; 100mAs; 125mAs; 160mAs; 200mAs; 250mAs; 320mAs; 400mAs; 500mAs; 640mAs |
| Exposure mode |
Manual/AEC (Automatic Exposure Control) |
| ARP |
≥1000 position |
| Power input |
380/400/415/440V~ 3ph 50/60Hz±1Hz Power: MAX: 90kVA Standby:1kVA |
| Radiation dose display |
DAP (optional) |
| X-ray Tube Assembly |
Anode |
Rotating anode |
| Target angle |
12° |
| Min. focus input power |
22kW |
| Max. focus input power |
54kW |
| Input voltage |
40 ~ 150kV |
| Max peak X-ray tube voltage |
150kV |
| Max current range |
400/700 mA |
| Nominal focal spot |
dual focus 0.6 mm/1.2 mm |
| Anode heat storage capacity |
163kJ/230kHU |
| Housing heat storage capacity |
975kJ /1354 kHU |
| Max housing heat dissipation rate |
196W(272 HU/sec) |
| Max anode heat dissipation rate |
750W (1056HU/sec) |
| Cooling method |
Natural cooling |
| Anode frequency |
50Hz/60Hz |
| Anode rotation speed |
50Hz(2700r/min)，60Hz(3200r/min) |
| Inherent filtration |
1.3mmAl/75kV |
| Weight |
16kg |
| Collimator |
Type |
Manual collimator |
| Beam shape |
Rectangular |
| Inherent filtration |
1.0mmAI/70kV |
| Full field light localizer |
Halogen light localizer |
| Rotation degree |
-45°～ 45° |
| Additional filtration |
0.5, 1.0, 1.5mm AI |
| Detector |
Detector type |
Digital flat panel detector (mobile wired) |
| Material |
Amorphous silicon (a-Si) semiconductor with cesium Iodide (CsI) scintillator |
| Cooling method |
Natural cooling |
| DQE |
>70% (0.1 lp/mm, RQA5) |
| Pixel area (detector size) |
14 x 17.4inch / 35 x 43cm |
| Pixel size |
143 μm |
| Matrix size |
2448 x 2984 |
| Dynamic range |
16 bit |
| Spatial resolution |
3.7 lp/mm |
| Imaging time of imaging system |
5s |
| Preview time of imaging system |
2.5s |
| Cycle time of imaging system |
6s |
| Weight |
3.2kg |
| Wire length |
9m |
| Data transmission method |
Ethernet |
| Wall Stand |
Type |
Bucky stand |
| Detector assembly vertical travel range |
1450mm (350mm ~ 1800mm), ±5％ |
| SID |
1000 ~ 2000mm |
| Movement method |
Manual |
| Brake |
Mechanical |
| X-ray Tube Assembly Support System |
Type |
Floor rails system |
| Control mode |
Manual |
| Tube assembly vertical travel range |
manual:1240 mm (560mm～1800mm), ±5％ |
| Tube assembly transverse motion |
manual: 1720mm, ±5％ |
| Movement method |
Manual |
| Tube vertical axis rotation angle |
≥360° |
| Tube horizontal axis rotation angle |
≥360° |
| Tube tilting angle |
≥37°(-20°～17°) |
| Patient table |
Type |
Stationary floating table |
| Table size |
2120mm×825mm×650mm (length , width, height) |
| Transparency equivalent (mmAI) |
≤1.2mmAl/100kV |
| Table panel floating range |
trans:±130mm; logn:±450mm; (manual) |
| Detector floating range |
logn:±290mm; (manual) |
| Load capacity |
200kg |
| Brake |
With footplate-brake on the wheels |
| Chamber |
Type |
3-field ionization chamber |
| Inherent filtration |
<0.7mmAl/75kV |
| Voltage |
40kV~150kV |
| Loading time |
0.5ms~10s |
| Dose range |
0.174~174uGy |
| Grid |
Type |
Fixed grid |
| Focus |
1.0m+1.8m |
| Grid ratio |
8:1 |
| Line |
40L/cm |
| Size |
470 x 450mm |
